6 Reasons Your Generator Fails To Work

Tuesday, August 24, 2021

 

A generator is an electrical device used in various fields and homes to supply an additional energy output. Many are often gas-powered, kick-starting the parts to run. This alone does not generate electrical power. Most of this technology works because a system of parts works together to transform kinetic energy, a system of moving equipment, into electricity.

As a portable device, a generator works well as a backup energy supply, helping when the main system goes offline. What, though, happens if something goes wrong? Owners should be aware of common reasons for malfunction. This knowledge may help get it fixed and running properly. Be on the lookout for the following six problems.
 
1. Check the Oil and Gas

Before you call emergency generator repair, make sure that the oil and gas are at proper levels. Many of today's devices have sensors to determine if the proper amount is in the unit. They will not work if it's off. In addition, the oil level could be off if the generator is not completely flat. If placed on the slanted ground, the oil tilts. This state could result in undetected.
 
2. Examine for Clogs

If gas has been placed in the generator, but it's still not running, look over the valve system. The fuel valve allows for the gas to move to the carburetor. If this doesn't happen, the device cannot function. First, see that the valve is open. Then, assess for clogs that could prohibit the flow. You may need to clear the lines to get things operating.
 
3. Scrutinize the Spark Plug

The spark plug kick starts the reaction with the fuel. If it's worn or damaged, the fuel may not activate, and the generator remains off. Assess the part's condition. Signs of color change or erosion are concerning. Furthermore, if you notice cracks or the park no longer provides a spark, it's time to replace it.
 
4. Replace the Switch

The switch to turn on the unit could be the trouble. The generator likely has a start and safety switch. Test them both using a multimeter. If bad, have a professional replace the part.
 
5. Try the Carburetor

When generators aren't used regularly, they could experience oil buildup concerns, especially in the carburetor. It's important to clean it out before storing it away. If it wasn't cleaned out, a clog likely developed, preventing flow and function. Either have a specialist replace the part or try to clear it out for improved movement.
 
6. Unplug Everything

The generator should start before you plug things into it. If you have anything attached, take it out. Start the unit, and then plug everything back in.

The generator is a source of power, keeping things running when the mainline goes out. It requires proper care and storage to continue working well. If it stops, go through the various parts to see if there is a concern. While you may just need oil, it could mean it's time to clean or repair part of the technology.



| FOLLOW ME ON SOCIAL MEDIA |
Photobucket Photobucket Photobucket Photobucket photo googleplus.png

No comments:

Post a Comment

I love reading and responding to comments but in order to get my reply you must ensure you are NOT a no-reply blogger. If you are, here are some quick steps to change that!

1. Go to the home page of your Blogger account.
2. Select the drop down beside your name on the top right corner and choose Blogger Profile.
3. Select Edit Profile at the top right.
4. Select the Show My Email Address box.
5. Hit Save Profile.